Tanks, Inc. - 5 Bolt Fuel Sending Unit

These optional fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground they work on all 6-24 volt systems positive or negative ground. They do not have a fuel pickup tube built into them as some original senders may have.  Made with a high quality ceramic board rheostat. Our fuel senders are available for the following applications. 

                       Application Listing:

• SW - Universal After-market gauges - 240-33 Ohms - TAN-SW
  
• GME - GM up to 1964 - 0-30 Ohms - TAN-GME
  
• GML - GM 1965 and up - 0-90 Ohms - TAN-GML
  
• ORG - Early Ford & Mopar - 73-10 Ohms - TAN-ORG
  
• VDO - VDO gauges - 10-180 Ohms - TAN-VDO
  

The first number of the (Ohms) represents empty and the following is for full.