Roadster Supply Rear Panhard Bar Weld-On Housing Brackets. Select bracket with 1/2" or 7 Degree hole below.Read more...
Roadster Supply Rear Panhard Bar Weld-On Housing Brackets
Select bracket with 1/2" or 7 Degree hole above.
Stamped from 3/16" steel. Suits 3" housings but can be trimmed to work on other applications. Spaces panhard bar away to clear center section. #53020 Accepts rod ends with 1/2" mounting bolt. #53021 Accepts Ford Tie Rod Ends with 7 Degree Taper. SOLD EACH
Designed for use with 3" housings but can be trimmed to suit other applications.
This bracket is perfect for applications that have odd-ball rear ends or frames that pre fabricated panhard kits are just not right. Designed to space the panhard bar away from the axle tube to clear the center section. Plasma cut and stamped steel construction for a quality finish.
|1 (ONE)||Universal Panhard Housing Bracket|
NOTES & TIPS:
Depending on application, a spacer may be required to allow panhard bar to clear center section.