This Borgeson power steering box is designed to replace the original manual box via a bracket which bolts to both the original frame and the new steering box.
Read more...
This power steering box is designed to replace the original manual box via a bracket which bolts to both the original frame and the new steering box. Our special pitman arm allows it to connect to either the original steering linkage or the highly recommended and vastly improved tie rod and idler arm conversion offered by Fatman Fabrications. The new box can be connected to either an aftermarket steering column, or the original steering column, including the shift levers, can be shortened to fit this box by using our optional Column Saver kit #990044. Conventional GM or Ford power steering pumps will typically provide the proper 900-1100 psi fluid and are easily connected with an optional hose kit. Not recommended for installation with a flat head engine. All Borgeson power steering boxes are assembled and tested in the USA from globally sourced components and have a 3 year warranty.
999062 SPECIFICATIONS:
Input Shaft: 11/16"-36 Spline
Pitman Shaft: Includes Pitman Arm
Pressure Port: 16mm X 1.5 Flare (Located closest to engine)
Return Port: 16mm X 1.5 Flare (Located closest to input shaft)
Maximum Pressure: 1450 PSI Maximum Operating Pressure, 1100-1250 Optimal
Flow Rate: 2.0-2.5 GPM Flow Rate Recommended
