Affordable Street Rods

Nu-Relics - Nostalgic Switches GM Style Quad with Harness for Door Placement - 408

Home / Nostalgic Switches GM Style Quad with Harness for Door Placement - 408

Nu-Relics Nostalgic Switches GM Style Quad with Harness for Door Placement - 408

Read more...
Nu-Relics Nostalgic Switches GM Style Quad with Harness for Door Placement - 408
Nu-Relics Nostalgic Switches GM Style Quad with Harness for Door Placement - 408
$499.00 Excl. tax
Delivery time: Due to manufacturer's delays, estimated shipping is 4-6 weeks
Brand:
Nu-Relics
+ -
Add to cart

Nu-Relics Nostalgic Switches GM Style Quad with Harness for Door Placement - 408

Nostalgic Switches with completed wire harness for door placement - 4 Window Kit. The bezel is an aluminum housing which has been milled, buffed, polished and chromed. The bezel has rounded corners which resembles the GM switches of the 50's and 60's. These are reverse polarity switches. These are not direct replacements for the original switches.

Bezels:

Quad: length = 4-1/4"; height = 1-7/8"
Single: length = 1-11/16; height = 1-3/4"
Hole Size:
Quad: length = 4-1/16"; height = 1-1/4"
Single: length = 1-5/8"; height = 1-1/4"
 
Technical Specs
  • Amperage
    Switch Current Loading Max Current
    Single Chrome, 10 AMPS 80 AMPS
    Nostalgic, FTFG
    Double Chrome, 10 AMPS 80 AMPS
    Nostalgic, FTFG
    Quad Chrome, 10 AMPS 80 AMPS
    Nostalgic, FTFG
     
    • Put Dielectric grease or tuner-lube inside the switch plug - then push the pins through the switch plug. The grease will keep moisture out and helps installing the pins into the plug
    • One pin on the back is longer then the others. This is to help line up the other pins. If it hits the inner door skin, the regulator or any metal, it can be cut off with wire cutters. The pin is copper - DO NOT use a cut-off wheel.
    • The red backing plate on the switch plug is not designed to be removed. If you remove the the red backing, there will be nothing to hold it back in place. With a small pick the terminals can be removed - only if necessary.
    • DO NOT press in on the switch levers when installing. Apply pressure around the bezel only.

 

Related products

Nu-Relics Nostalgic Switches GM Style Double with Harness for Door Placement - 207

Nostalgic Switches GM Style Double with Harness for Door Placement - 207

 $265.00
Nu-Relics Nostalgic Switch GM Style Double with Harness for Console Placement -209

Nostalgic Switch GM Style Double with Harness for Console Placement -209

 $199.00
Nu-Relics Nostalgic Switch GM Style Quad with Harness for Console Placement - 410

Nostalgic Switch GM Style Quad with Harness for Console Placement - 410

 $306.00