Roadster Supply Company - Roadster Supply Ladder Bar Housing Brackets Steel 3 1/2" - RSC-54019

Roadster Supply Ladder Bar Housing Brackets Steel 3 1/2" - RSC-54019

Flame Cut Steel right here in the So-Cal, USA. For use with 3 1/2" OD axle tubes and oblong to suit triangulated setups. Perfect for Banjo type rear ends. Center of clevis holes: 5 3/4". Thickness: 3/8". Clevis Hole ID: 7/16". SOLD IN PAIRS

FEATURES:

Center to Center of Clevis Bolts: 5 3/4"
For Rear End Housing Tube Diameter: 3 1/2" (Oblong Hole For Triangulated Set Ups)

Designed for use on Banjo type, and other tapered rear ends that require a large 3 1/2" dia. rather than standard 3". Flame cut, weldable steel with mill scale coating to prevent rust. 5 3/4" Clevis centers to accept most rear ladder bar kits. Suits common 3/8" wide clevises with 7/16" bolt dia.


WHAT'S INCLUDED:

NOTES & TIPS:

Know what ladder bars you have prior to buying ladder bar housing brackets. Although the 5 3/4" center to center used on our brackets is the most common, some manufacturers may use a different center to center spacing when fabricating ladder bars.

These brackets do not have a perfect 3 1/2" hole, they are oblong to suit triangulated kits.