Tanks, Inc. - GPA Series Fuel Pump Assembly No Pump, Sock, or Sleeve - GPA-A

GPA Series Fuel Pump Assembly No Pump, Sock, or Sleeve - GPA-A

• Heavy 10 gauge no-warp mounting plate
• 1/4" NPT Supply and Return Line
• Barbed Vent Fitting
• Oven brazed fittings
• In-tank wire harness

    The GPA-Series Fuel Pump Hanger is designed to be used in many of our die-stamped alloy-coated and stainless steel gas tanks that have factory-installed reservoir trays. The tray is an absolute necessity for fuel-injection in order to prevent fuel starvation when accelerating and cornering.

     This hanger is pre-wired with a Walbro pump plug. (The gasket and screws with o-rings are not included with the hanger because we include gaskets and screws with our tanks.)

    The heavy 10-gauge no-warp mounting plate contains fittings for the supply, the return, the vent and the electrical connector.  It is yellow-zinc plated to prevent corrosion.