Easy Street Master Kit w/ Force Fuel, Fuel Delivery System - 35205
Read more...
| Article number: | FT-35205 |
Easy Street Master Kit w/ Force Fuel, Fuel Delivery System - 35205
Master Kit includes :
FiTech Fuel Injection is rounding out the street line with the all new Easy Street 600hp system. The street series includes the 150-400hp Go Street and the 200-800hp Mean Street, now we’re adding the 250-600hp Easy Street system! Pre-programmed with bolt-n-go technology for out of the box performance with minimal input required. Easy tach input, reads tach signal from COIL, HEI, CDI, and many other ignition brands (No timing control). For non boosted engines naturally aspirated applications only.
| • | Application: Chevrolet, Pontiac, Ford, Chrysler, Dodge, Plymouth, Etc. engines making 200 HP up to 600 HP with a 4-barrel intake manifold. For non boosted engines naturally aspirated applications only. |
| • | Replacement for any 4-barrel carburetors for engines with 200 HP up to 600 HP. |
| • | Use the same size air cleaner you would normally use for your 4-barrel carburetor. |
| • | 1 BAR internal MAP sensor. | • | Suitable for up to 600hp. | |
| • | (4) Flow matched injectors. | • | (1) Fan control. | |
| • | Built-in pressure regulator. | • | Classic carb gold finish. |
| • | (1) Die-cast throttle body. | • | (1) O2 bung kit. | |
| • | (1) Hand-held controller. | • | (1) CTS sensor. | |
| • | (1) Hand-held controller cable. | • | (1) CTS adapter. | |
| • | (1) Windshield mount. | • | (1) Mini USB cable. | |
| • | (1) 4+2-Pin Connector. | • | (1) Return plug. | |
| • | (1) O2 sensor. | • | (1) Gasket kit. |
Force Fuel, Fuel Delivery System, Single 340 LPH Pump 800hp - FT-50004
The all new FiTech Force Fuel System makes the upgrade to fuel injection even easier! The Force Fuel simply connects to a stock mechanical or electric fuel pump then supplies the EFI system with high pressure through the use of an internal 340-LPH pump. This means you don’t need to run a new feed line from the tank!
With a strong, versatile mounting bracket, the Force Fuel System mounts under and is fed with the original fuel pump. The assembly holds half-a- gallon of fuel to submerge the electric fuel pump to keep it cool for long life and no chance of fuel starvation. An internal regulator keeps the pressure at a consistent 58-psi which is ideal for reliable EFI performance.
A serviceable 10-micron fuel filter is supplied to keep the finest debris away from the injectors along with five feet of high pressure fuel hose, AN fittings and clamps. The precision machined extrusion is designed for strength and sealed tight. There is also an easy-to-view fuel pressure gauge installed for quick checks and heavy duty wire terminals are also supplied to complete the installation.
