Easy Street Master Kit w/ Force Fuel, Fuel Delivery System, w/CDI box - 93505
Read more...
| Article number: | FT-93505 |
Easy Street Master Kit w/ Force Fuel, Fuel Delivery System, w/CDI box - 93505
FiTech Fuel Injection is rounding out the street line with the all new Easy Street 600hp system. The street series includes the 150-400hp Go Street and the 200-800hp Mean Street, now we’re adding the 250-600hp Easy Street system! Pre-programmed with bolt-n-go technology for out of the box performance with minimal input required. Easy tach input, reads tach signal from COIL, HEI, CDI, and many other ignition brands (No timing control). For non boosted engines naturally aspirated applications only.
The Fuel Delivery Kit features an EFI grade 255 L/PH inline external fuel pump that is suitable for engines making up to 650HP. (Note that some of our EFI kits are limited to less than 750HP due to maximum usable injector sizes.)
The FiTech Go-Spark CD Ignition was designed for both EFI equipped or carbureted engines and features a microprocessor to manage the spark delivery. The ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture.
The Go-Spark CDI is designed for 4, 6 and 8-cylinder engines equipped with a distributor. It accepts the trigger signal from an HEI, amplifier, points or 2-wire non-magnetic pickup distributors. The tach output signal, which is also used to trigger a FiTech EFI system, is a 12-volt square wave signal that is divorced from other circuits to provide a clean, perfect signal. The Go-Spark also features one, sealed connector to simplify installation.
| • | Application: Chevrolet, Pontiac, Ford, Chrysler, Dodge, Plymouth, Etc. engines making 200 HP up to 600 HP with a 4-barrel intake manifold. For non boosted engines naturally aspirated applications only. |
| • | Use the same size air cleaner you would normally use for your 4-barrel carburetor. |
| • | 1 BAR internal MAP sensor. | • | Suitable for up to 600hp. | |
| • | Built-in pressure regulator. | • | Classic carb gold finish. |
| • | (1) Die-cast throttle body. | • | (1) O2 bung kit. | |
| • | (1) Hand-held controller cable. | • | (1) CTS adapter. | |
| • | (1) Windshield mount. | • | (1) Mini USB cable. | |
| • | (1) 4+2-Pin Connector. | • | (1) Return plug. | |
| • | (1) O2 sensor. | • | (1) Gasket kit. | |
| • |
(1) FiTech Force Fuel System |
• |
(5) ft of EFI High Pressure hose |
|
| • | AN fuel line fittings | • |
Hose Clamps |
|
| • | (1) CDI Ignition Box |
|
