New Port Engineering - 1948 FORD Mercury WIPER MOTOR - NE4800FP

1948 FORD Mercury WIPER MOTOR - NE4800FP

Motor mounts in stock location under the dash using stock linkage and transmissions.  The two speed switch provided will mount in stock location but delay switch will not.  

*Note: The late 47 uses the large one piece wiper transmissions.  The hole in the cowl for the wiper transmissions is 5/8 inches in diameter.  The wiper transmissions are rivited to a common bar that features mounting tabs for the wiper motor. Motor mounts in stock location under the dash using stock linkage and transmissions.  The two speed switch provided will mount in stock location but delay switch will not.  

The Clean Wipe Wiper Drive is a true bolt-in replacement for your original equipment vacuum or electric windshield wiper motor. Each model of the Clean Wipe Wiper Drive is designed for the specific year and model of vehicle. Wiper drives attach to the stock mounting brackets. Designed for attachment to O.E.M. wiper transmission or cable drums.

• Kits are 12 volt. If your vehicle is 6 volt, you will need a power Inverter.
• Each kit comes complete with nylon bushings to replace the rubber grommets in the wiper transmission linkage arms. (when required)
• Three Year Guarantee

• 2 Speed Extension - NE14014 
• Delay Extension - NE14015