Go EFI 4 System (Aluminum Finish) Master Kit w/ Force Fuel, Fuel Delivery System, w/CDI box - 93501
Read more...
| Article number: | FT-93501 |
Go EFI 4 System (Aluminum Finish) Master Kit w/ Force Fuel, Fuel Delivery System, w/CDI box - 93501
Application:
The Go EFI 4 Self Tuning Fuel Injection is rated at 600 HP but is suitable for engines from 200hp thru 650hp. This system is perfect for your everyday Driver right up to your weekend Street Machine or Bracket Racer. It features the FASTEST most accurate Self Learning available, Timing control, Wet flow Annular discharge and tons of additional features.
It fits any 4-bbl intake manifold and is the most self-contained and full-featured unit of this type. The ECU (computer) is mounted on the throttle body, which greatly simplifies installation. No hole in your firewall and no unsightly harness draped across your engine. This is also the only computer mounted throttle body that offers spark control without the need for an external spark box or special distributor. It also has a built-in fuel pressure regulator. A hand-held controller features a touch screen for quick and easy initial set-up.
The FiTech Force Fuel System makes the upgrade to fuel injection even easier! The Force Fuel simply connects to a stock mechanical or electric fuel pump then supplies the EFI system with high pressure through the use of an internal 340-LPH pump. This means you don’t need to run a new feed line from the tank!
With a strong, versatile mounting bracket, the Force Fuel System mounts under and is fed with the original fuel pump. The assembly holds .5 gallon of fuel to submerge the electric fuel pump to keep it cool for long life and no chance of fuel starvation. An internal regulator keeps the pressure at a consistent 58-psi which is ideal for reliable EFI performance.
A serviceable 10-micron fuel filter is supplied to keep the finest debris away from the injectors along with five feet of high pressure fuel hose, AN fittings and clamps. The precision machined extrusion is designed for strength and sealed tight. There is also an easy-to-view fuel pressure gauge installed for quick checks and heavy duty wire terminals are also supplied to complete the installation.
The FiTech Go-Spark CD Ignition was designed for both EFI equipped or carbureted engines and features a microprocessor to manage the spark delivery. The ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture.
The Go-Spark CDI is designed for 4, 6 and 8-cylinder engines equipped with a distributor. It accepts the trigger signal from an HEI, amplifier, points or 2-wire non-magnetic pickup distributors. The tach output signal, which is also used to trigger a FiTech EFI system, is a 12-volt square wave signal that is divorced from other circuits to provide a clean, perfect signal. The Go-Spark also features one, sealed connector to simplify installation.
Features
Kit Contents
Quick Start Guide Hand-held Controller
Hand-held Controller Feature Definitions
Hand-held Controller Feature Definitions
