40004 - Fuel Command Center 2.0 Fuel Delivery System - 40004
Read more...Article number: | FT-40004 |
The Command Center 2 is the ultimate answer to fuel system simplicity! Designed to be used in vehicles with stock fuel tanks converting from a carburetor to EFI. The Command Center 2 eliminates that problem. Complete new design from years of testing has resulted in the most effective system anywhere. The pump in the Command Center 2 never gets uncovered because it receives a steady supply of fuel from your existing fuel system. So your system maintains a constant flow of fuel. The built-in regulator eliminates the need for an external regulator. Since the Command Center 2 is constantly circulating fuel to and from your tank, your fuel pump stays cooler and will have a longer life. The fuel pump noise is also muffled by being submerged in fuel 100% of the time. The Command Center 2 is the best way to provide the necessary increase in volume when adding a power adder such as boost or nitrous to your engine. So, whether you are racing, off-roading, or just cruising, this “compact” external fuel assembly is your all in one solution.
• | Capable of delivering enough fuel for up to 800hp. | • | A low fuel level in the fuel tank will not result in pump starvation. | |
• | Single High Volume Flex Fuel 340 LPH pump is compatible with any EFI system. | • | Maintains a 1.5 Liter (0.4 Gallons) reservoir of fuel in the module at all times. | |
• | A submerged pump runs cooler than an external pump. | • | Eliminates rigging costly EFI quality inlet and return lines for your fuel system. | |
• | No needle seats or floats to get hung up or stick! | • | Every FiTech Go EFI System is available with the Command Center 2 as an option. | |
• | Precision machined extruded aluminum tank. | • | Compatible with any other competitive aftermarket or factory EFI installation. | |
• | Hard anodized and laser etched for durability and visual appeal. | • | Compatible with E-85 gasoline and alcohol or methanol based fuels. | |
• | Compact size makes it easily mountable in a variety of locations. |
• | Main assembly w/340 LPH fuel pump, regulator, pressure gauge. |
• | 5ft high-pressure hose & -6 AN fittings connect main assembly to throttle body. |
• | Hyperfuel high-flow 30-micron EFI fuel filter. |
• | Return fitting and seals. |